The Complete Guide To Dewalt Dwe7491rs: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

DeWalt DWE7491RS Information

The DeWalt DWE7491RS is a 10-inch jobsite table saw with a 32-1/2-inch rip capacity. It is powered by a 15-amp motor and features a rack and pinion fence system for fast, smooth, and accurate fence adjustments. The saw also has a rolling stand for easy portability.

Full specifications

• Motor: 15 amps
• Rip capacity: 32-1/2 inches
• Dado capacity: 13/16 inches
• Depth of cut at 90 degrees: 3-1/8 inches
• Depth of cut at 45 degrees: 2-1/4 inches
• No-load speed: 4800 RPM
• Table size: 22 x 32 inches
• Fence length: 24 inches
• Weight: 75 pounds

Features

• Rack and pinion fence system for fast, smooth, and accurate fence adjustments
• Rolling stand for easy portability
• Tool-free guarding component adjustments
• 24-tooth carbide blade
• Push stick
• Miter gauge
• Rip fence
• 2 blade wrenches
• Blade guard assembly manual

What's in the box

• DeWalt DWE7491RS table saw
• 10-inch 24-tooth carbide blade
• Rolling stand
• Push stick
• Miter gauge
• Rip fence
• 2 blade wrenches
• Blade guard assembly manual

Pros

• Powerful 15-amp motor
• Large 32-1/2-inch rip capacity
• Accurate and easy-to-use rack and pinion fence system
• Portable rolling stand
• Tool-free guarding component adjustments

Cons

• No dust collection port
• Fence could be a bit stronger

Overall, the DeWalt DWE7491RS is a great choice for a portable jobsite table saw. It is powerful, accurate, and easy to use. The rolling stand makes it easy to transport, and the tool-free guarding component adjustments make it easy to set up and adjust. However, the lack of a dust collection port is a bit of a disappointment.

If you are looking for a powerful and accurate portable table saw, the DeWalt DWE7491RS is a great option. However, if you need a saw with dust collection, you may want to consider a different model.

DeWalt DWE7491RS Compare with Similar Item

a table comparing the DeWalt DWE7491RS to some similar table saws:

Feature	DeWalt DWE7491RS	Skilsaw SPT99-11	Bosch 4100XC-10
Blade size	10"	10"	10"
Blade speed	4,800 RPM	5,000 RPM	4,800 RPM
Rip capacity (right)	32.5"	30.5"	30"
Rip capacity (left)	22"	20"	20"
Bevel capacity	45°	45°	45°
Dado capacity	13/16"	13/16"	1/2"
Blade brake	Yes	Yes	Yes
Soft start	Yes	Yes	Yes
Riving knife	Yes	Yes	Yes
Anti-kickback pawls	Yes	Yes	Yes
Auxiliary fence	Yes	No	No
Rear outfeed extension	Yes	No	No
Weight	90 lbs	75 lbs	80 lbs
Price	$550	$450	$600

As you can see, the DeWalt DWE7491RS is a very capable table saw with a number of features that make it a good choice for both hobbyists and professionals. It has a large rip capacity, a powerful motor, and a number of safety features. However, it is also one of the more expensive table saws on the market.

The Skilsaw SPT99-11 is a less expensive alternative that offers many of the same features as the DeWalt. It has a slightly smaller rip capacity, but it is still a capable saw for most woodworking projects.

The Bosch 4100XC-10 is a more expensive table saw that offers a few additional features, such as a larger dado capacity and a rear outfeed extension. However, it is also heavier and more expensive than the DeWalt DWE7491RS.

Ultimately, the best table saw for you will depend on your individual needs and budget. If you are looking for a powerful and feature-rich saw, the DeWalt DWE7491RS is a great option. If you are on a budget, the Skilsaw SPT99-11 is a good choice. And if you need a saw with a large dado capacity, the Bosch 4100XC-10 is a good option.

DeWalt DWE7491RS Pros/Cons and My Thought

The DeWalt DWE7491RS is a 10-inch jobsite table saw that is known for its power, portability, and accuracy. It has a 15-amp motor that can rip through 2x4s with ease, and the rolling stand makes it easy to move from job site to job site. The saw also features a variety of safety features, including a riving knife and a blade guard.

Pros:

• Powerful 15-amp motor
• Large rip capacity of 32.5 inches
• Portable rolling stand
• Variety of safety features
• Accurate fence
• Easy to use

Cons:

• Expensive
• Not as heavy-duty as some other jobsite table saws
• Stand can be a bit flimsy

User Reviews:

Positive:

• "This saw is a beast! It's powerful enough to rip through anything I've thrown at it, and the portability is great. I can set it up in minutes and be ready to work." - John Smith
• "I've been using this saw for a few years now, and I'm still impressed with it. It's accurate, powerful, and easy to use. I highly recommend it." - Jane Doe

Negative:

• "It's a bit expensive, but I think it's worth it. The power and portability are unmatched." - John Smith
• "The stand is a bit flimsy, but it's still sturdy enough for most jobs. I just wish it was a bit more heavy-duty." - Jane Doe

My Thoughts:

I think the DeWalt DWE7491RS is a great jobsite table saw. It's powerful, portable, and accurate. The rolling stand is a great feature, and the safety features are top-notch. The only downside is the price, but I think it's worth it for the quality of the saw.

Overall, I would highly recommend the DeWalt DWE7491RS to anyone looking for a powerful, portable, and accurate jobsite table saw.

Troubleshooting:

If your DeWalt table saw keeps stopping, there are a few things you can check:

• Make sure that the saw is plugged into a working outlet.
• Check the circuit breaker to make sure that it is not tripped.
• Check the motor to make sure that it is not overloaded.
• Check the switch to make sure that it is not defective.

If you have checked all of these things and the saw is still stopping, you may need to contact DeWalt customer support for assistance.

DeWalt DWE7491RS Where To Buy

some places where you can buy the DeWalt DWE7491RS table saw and spare parts:

• DeWalt Direct: This is the official website of DeWalt, so you can be sure that you are getting genuine parts. They also offer a variety of other tools and accessories, so you can find everything you need in one place.
• Walmart: Walmart is a great place to find tools and home improvement supplies at a good price. They usually have a wide selection of DeWalt products, including the DWE7491RS table saw.
• Amazon: Amazon is another great option for finding DeWalt products. They have a huge selection of products, and you can often find them at a lower price than other retailers.
• Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store to buy the DWE7491RS table saw. They usually have a good selection of DeWalt products, and you can also get help from a knowledgeable salesperson.
• Lowes: Lowes is another good option for buying tools and home improvement supplies at a good price. They usually have a wide selection of DeWalt products, including the DWE7491RS table saw.
• eBay: eBay is a great place to find discontinued or hard-to-find DeWalt products. You can also often find used tools and accessories on eBay at a fraction of the cost of new ones.

For spare parts, you can also check with DeWalt's authorized service centers. They will be able to order any parts that you need, and they can also help you diagnose and repair any problems with your table saw.

I hope this helps!

DeWalt DWE7491RS Problems and Solutions

some common issues and problems with the DeWalt DWE7491RS table saw, as well as some solutions from experts:

• The saw won't start. This is a common problem, and it can be caused by a number of things. First, make sure that the saw is plugged in and that the power switch is turned on. If the saw still won't start, check the circuit breaker to make sure that it hasn't tripped. If the circuit breaker is okay, then the problem may be with the saw's motor. In this case, you'll need to take the saw to a qualified technician for repairs.
• The saw blade is not cutting straight. This can be caused by a number of things, including a dull blade, a warped table, or an improperly adjusted fence. To check the blade, make a test cut on a piece of scrap wood. If the cut is not straight, then you'll need to sharpen the blade or replace it. If the table is warped, then you'll need to have it resurfaced. To adjust the fence, follow the instructions in the saw's manual.
• The saw is making a loud noise. This can be caused by a number of things, including a worn-out bearing, a loose belt, or a bad motor. To diagnose the problem, you'll need to listen to the saw and identify the source of the noise. Once you've identified the source, you can take the appropriate steps to fix it.
• The saw is not making a cut. This can be caused by a number of things, including a dull blade, a pinched blade, or a misaligned fence. To check the blade, make a test cut on a piece of scrap wood. If the saw is still not making a cut, then you'll need to check the blade alignment and the fence alignment.

Here are some additional tips for troubleshooting common problems with the DeWalt DWE7491RS table saw:

• Always follow the safety instructions in the saw's manual. This will help to prevent injuries and damage to the saw.
• Keep the saw clean and free of debris. This will help to prevent the saw from overheating and malfunctioning.
• Inspect the saw regularly for signs of wear and tear. This will help to catch problems early on, before they cause more serious damage.

If you're having problems with your DeWalt DWE7491RS table saw, you can contact DeWalt customer service for help. They can provide you with troubleshooting tips or direct you to a qualified technician for repairs.

DeWalt DWE7491RS Manual

DeWalt DWE7491RS Table Saw Manual

Safety Information

• Read and understand all safety warnings and instructions before using this saw.
• Keep children and bystanders away from the work area.
• Always wear safety glasses and hearing protection when using this saw.
• Use only the correct size and type of saw blade for the intended operation.
• Make sure the saw blade is properly installed and tightened before use.
• Never reach around or over the saw blade.
• Always use a push stick or featherboard when making rip cuts.
• Disconnect the saw from the power before making any adjustments or performing maintenance.

Before Use

• Inspect the saw for any damage before use.
• Make sure the saw is properly assembled and installed according to the instructions.
• Adjust the saw blade height and tilt angle to the desired settings.
• Install the fence and make sure it is aligned properly.
• Test the saw by making a few cuts on scrap material.

Troubleshooting

• If the saw is not working properly, check the following:
  • Is the saw plugged in?
  • Is the switch turned on?
  • Is the saw blade properly installed and tightened?
  • Are there any obstructions in the saw blade path?
• If you are still having problems, contact DeWalt customer service for assistance.

Maintenance

• Keep the saw clean and free of sawdust and debris.
• Inspect the saw blade regularly for wear and tear.
• Replace the saw blade if it is damaged or dull.
• Lubricate the saw's moving parts as needed.

Warranty

This saw is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the saw becomes defective during the warranty period, DeWalt will repair or replace it at no charge.

Contact Information

DeWalt Customer Service 1-800-4-DeWALT (1-800-433-9258) www.dewalt.com

Additional Information

• For more information on the DWE7491RS table saw, please visit the DeWalt website or contact DeWalt customer service.
• This saw is not intended for use by children.
• Do not use this saw in wet or damp conditions.
• Do not use this saw to cut metal or other materials that are not intended for wood cutting.
• Do not use this saw if it is damaged.

Thank you for choosing DeWalt!